Skip to content

Tanshanomi’s Bikes

  • Benelli 250
  • Retroblaster
  • El Fènix
  • Φ Bultakenstein [Aborted]
  • Φ The Bride [Sold]
  • All Projects
I damaged the engine internals
Posted in
  • Φ The Bride [Sold]

I damaged the engine internals

June 13, 2023January 1, 2025

I opened up the engine to remove the governor, and found this. The oil slinger has broken off the con rod. It was kind of a freak thing. While I was wiring … I damaged the engine internalsRead more

Wiring is complete and functional
Posted in
  • Φ The Bride [Sold]

Wiring is complete and functional

June 6, 2023January 1, 2025

With a the exception of a couple of tweaks here and there, The Bride’s electrical system is complete. All the lighty-up parts light, the horn beeps, the relays…relay, the starter turns, and … Wiring is complete and functionalRead more

Getting ’er wired
Posted in
  • Φ The Bride [Sold]

Getting ’er wired

May 18, 2023January 1, 2025

I’m still slogging through wiring up The Bride’s electrical equipment. I know a lot of custom bike builders especially dread electrical work, but it’s really not that bad. It’s just time-consuming and … Getting ’er wiredRead more

Intake Support Bracket
Posted in
  • Φ The Bride [Sold]

Intake Support Bracket

May 18, 2023January 1, 2025

The extremely long intake runner needed some sort of support, so that the welds at the head flange were not supporting the entire weight of the carb and air cleaner at the … Intake Support BracketRead more

Two crimps forward, one crimp back.
Posted in
  • Φ The Bride [Sold]

Two crimps forward, one crimp back.

May 11, 2023January 1, 2025

With the battery mounted to the bike, I’m now working to get all the electrics wired up. First up was the left-hand handlebar switch, a super-cheapie unit I originally purchased seven or … Two crimps forward, one crimp back.Read more

Alternator swap
Posted in
  • Φ The Bride [Sold]

Alternator swap

May 8, 2023January 1, 2025

Shortly after purchasing The Bride’s LCT 208 Stormforce engine, I also picked up a 60-watt charging coil and electric-start flywheel. I intended to stick with the stock 27-watt coils initially, and upgrade … Alternator swapRead more

Battery Tray Redux
Posted in
  • Φ The Bride [Sold]

Battery Tray Redux

May 7, 2023January 1, 2025

If it seems as though I spent an inordinate amount of time on the battery tray, you’d be correct. But — to steal a saying from Home Built By Jeff — “anything … Battery Tray ReduxRead more

Tank decals
Posted in
  • Φ The Bride [Sold]

Tank decals

May 4, 2023January 1, 2025

The die-cut vinyl “Panther” decals I originally intended to use turned out to be prohibitively expensive to make. The setup fees print shops (both local and online) charge make “onesie-twosie” custom cuts … Tank decalsRead more

Battery tray success
Posted in
  • Φ The Bride [Sold]

Battery tray success

May 2, 2023January 1, 2025

I tried modifying my earlier steel battery box to fit my new, smaller battery. It turns out that not only can I not weld, I also cannot measure. The result was still … Battery tray successRead more

Battery Swap
Posted in
  • Φ The Bride [Sold]

Battery Swap

April 24, 2023January 1, 2025

I did some practical tests, and my cheapie 50 CCA battery [Weize YTX4L-BS] is able to spin The Bride’s starter motor at a similar perceptible speed as the larger 90 CCA Motobatt. … Battery SwapRead more

Posts pagination

Previous 1 … 9 10 11 … 47 Next
Copyright © 2011-2026 Tanshanomi.com and owners thereof.
Powered by WordPress and HybridMag.
  • Benelli 250
  • Retroblaster
  • El Fènix
  • Φ Bultakenstein [Aborted]
  • Φ The Bride [Sold]
  • All Projects